FCBackground-UTMB-PIC

FCBackground-UTMB-PIC

Install or Upgrade Firmware

• Follow instructions in "M:\rfid_appliance\VRReader\docs\Programming VRForkliftReader Boards.txt"

Reader Settings

• Record the following

get hostname
get version
get build              

• Setup the following

set heartbeat enabled
set heartbeattimer 300
set rfidenabled enabled
set powerbase 30
set antenna a
set tagmetadata epc readcount rssi antenna
rfid tagtable enabled
set tagmetadataenabled enabled
set tagpersist 10
set tagresend 300
                   
set filtertype table
set triggermode security 2000
set readmode cont

set serverhostname www.fcbackground.com
set serverurl /fcbid/webservices/vrpost01.aspx
set httpport 80
set httpcontenttype urlencoded
set httpmetadata rfid sys hostname rfidstatus
set httpmsgretry 255
set httptimeout 10
set asyncdelivery enabled
set debug disabled
set password 0 vrfc7

• Change the year month date...etc with real numbers

set clock YYYY MM DD hh mm ss

Setup Ethernet Settings

• Look up the hostname/serial no. of the unit in the ReaderList?.xls document under "M:/FCBackground" to find the Ethernet settings

SET HOSTIP 10.161.162.xx

SET GATEWAY 10.161.162.1

SET NETMASK 255.255.255.0

Test RFID

• Perform a RFID test by sending RFID READ/AUTO on both antennas. Set the ANTENNA back to A.

• Setup the reader to radiate continuously

SET READMODE CONT