FCBackground-VR2KCNBT01
Jump to navigation
Jump to search
FC Construction Configuration - VR2KCNBT01 equipped Turnstile[edit | edit source]
System Test[edit | edit source]
Customer Specific Configuration[edit | edit source]
wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/fcb/vr-VR2KCNBT01-secondrun.sh -O - | sh
Without GPS:
wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/fcb/vr-VR2KCNBT01-Without_GPS-secondrun.sh -O - | sh
After System Test[edit | edit source]
DUALZONE setup (TURNSTILE configuration)[edit | edit source]
wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/fcb/pre-ship.sh -O - | sh
Setup Security Login
nc localhost 2020
set password 0 vrfc7
0 commit
Setup Facial Recognition[edit | edit source]
SET LMSERVERURL http://10.10.10.20:3001/ SET LMAUTHENABLED ENABLED SET LMRESPONSETIMEOUT 3000 SET COMPONENTIDPREFIX ENABLED
After Mounted Inside Turnstile[edit | edit source]
Setup Component IDs for Entry and Exit Badge Scanners[edit | edit source]
Get CAN IDs form Badge Scanners (not always the same)
nc localhost 2020
0 get inventory
Set Entry Badge Scanner Component ID using the CAN ID (c10?) received above
c10? SET COMPONENTID 108
Set Exit Badge Scanner Component ID using the CAN ID (c10?) received above
c10? SET COMPONENTID 109
Verify Component IDs set
CAN RESET
0 get inventory
Setup Cameras[edit | edit source]
According to printed manual
Turnstile System Test[edit | edit source]
Run Turnstile V3 Test