LockheedMartin

ONSITE

VR Doc Reader

Customer Specific Configuration

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-docreader-secondrun.sh -O - | sh

After VR Hardware Manager test

• Reboot unit after Test

Run Pre-Ship Script

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-pre-ship-wifi-trigger.sh -O - | sh

VR 30 Antenna Surface Reader

Customer Specific Configuration

• Master / Secondary Configuration

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-30antsurface_master-secondrun.sh -O - | sh
wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-30antsurface_secondary-secondrun.sh -O - | sh

• Master Only Configuration

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-30antsurface_masteronly-secondrun.sh -O - | sh

Run Pre-Ship Script

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-pre-ship-wifi.sh -O - | sh

VR Ultra Slimtrak Reader

Customer Specific Configuration

• Master Only Configuration

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-ultraslimtrak-m-secondrun.sh -O - | sh

• Master / Secondary Configuration

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-ultraslimtrak-ms-secondrun.sh -O - | sh

After VR Hardware Manager test

• Reboot unit after Test

Run Pre-Ship Script

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-pre-ship-wifi-trigger.sh -O - | sh

• Wait 30sec before unplugging.

Prepare Unit for Re-Running VR Hardware Manager Tests

echo "SET TRIGGERMODE MANUAL" | nc localhost 2020 | grep "ACK"

echo "SET TIMEOUT 1000" | nc localhost 2020 | grep "ACK"

echo "SET RETRIGGER DISABLED" | nc localhost 2020 | grep "ACK"

echo "SET TRIGGERINPUT 1" | nc localhost 2020 | grep "ACK"

echo "SET TRIGGERLEVEL 0 0 0 0 1 1 1 1" | nc localhost 2020 | grep "ACK"

echo "COMMIT" | nc localhost 2020 | grep "ACK"

sync

VR Stairwell Reader

Customer Specific Configuration

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-stairwell-secondrun.sh -O - | sh

After VR Hardware Manager test

• Reboot unit after Test

Run Pre-Ship Script

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-pre-ship-wifi-trigger.sh -O - | sh

VR 8-Port Reader

Customer Specific Configuration

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-8port-wifi-secondrun.sh -O - | sh

These commands should NOT be applied when using a 4.5 Board with the new POE module

nc localhost 2020
SET BLF 640KHZ
SET TARI 6.25
COMMIT

After VR Hardware Manager test

• Reboot unit after Test

Run Pre-Ship Script

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-pre-ship-wifi-trigger.sh -O - | sh

VR 4-Port Reader

Customer Specific Configuration

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-4port-wifi-secondrun.sh -O - | sh

These commands should NOT be applied when using a 4.5 Board with the new POE module

nc localhost 2020
SET BLF 640KHZ
SET TARI 6.25
COMMIT

After VR Hardware Manager test

• Reboot unit after Test

Run Pre-Ship Script

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-pre-ship-wifi-trigger.sh -O - | sh

VR 2-Port Reader

Customer Specific Configuration

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-2port-wifi-secondrun.sh -O - | sh

These commands should NOT be applied when using a 4.5 Board with the new POE module

nc localhost 2020
SET BLF 640KHZ
SET TARI 6.25
COMMIT

After VR Hardware Manager test

• Reboot unit after Test

Run Pre-Ship Script

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-pre-ship-wifi-trigger.sh -O - | sh

VR Slimlines

Customer Specific Configuration

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-slimlines-secondrun.sh -O - | sh

VR Hardware Manager test

As to the build with VR 8-Port Reader, choose VR Slimlines 8-Port - Lockheed [Prebox]
As to the build with VR 4-Port Reader, choose VR Slimlines 4-Port - Lockheed [Prebox]

Run Pre-Ship Script

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-pre-ship-wifi-trigger.sh -O - | sh

As to Slimlines with two antennas, use:

SET MUX 1 2

Or as to Slimlines with three antennas, use:

SET MUX 1 2 3

Finally, save changes:

COMMIT

VR Flammable Storage Cabinet (Small)

Customer Specific Configuration

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-cabinetsmall-secondrun.sh -O - | sh

VR Hardware Manager test

• choose VR2LE Reader [System]

VR Flammable Storage Cabinet (Large)

Customer Specific Configuration

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-cabinetlarge-secondrun.sh -O - | sh

VR Hardware Manager test

• choose VR4LE Reader [System]

VR 8 Antenna Surface Unit

Customer Specific Configuration

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-8antsurface-secondrun.sh -O - | sh

VR4LE - DIV Rated Portals (UltraSlimTrak, HybridTrak and SlimTrak)

Customer Specific Configuration

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/lockheed_martin/vr-div-secondrun.sh -O - | sh

VR Hardware Manager test

• choose VR4LE - DIV 8 Ant [PreBox]
• choose VR4LE - DIV 6 Ant [PreBox]

Or

• Step 1: choose VR4LE Reader [System]
• Step 2: manually test external GPIO with the UltraSlimTrak Slave

Manual Check/Test

CAN Bus

bash /home/user/vr-cantest.sh