VRLinuxBoard4.3-GUI

BOARD SETUP

VR Linux Board 4.3 loading (new FIDO image)

Yocto-fido machine = vr-am33-linuxboard

Initial Nand Image (u-boot,kernel,fs)

• power-on reboot device
• Keep pressing the space-bar until prompt "VAR-SOM-AM33 #"

save
bootp
tftp ${loadaddr} zImage-vr-am33v2-linuxboard-20160510.bin

# E modules
tftp ${fdtaddr} zImage-vr-am33v2-linuxboard-E-20160510.dtb

# F modules
tftp ${fdtaddr} zImage-vr-am33v2-linuxboard-F-20160510.dtb

setenv serverip 192.168.19.35
setenv rootpath /srv/nfs/vr-am33-m2mreader
run netargs
bootz ${loadaddr} - ${fdtaddr}

filesystem

//login username: root password: rfid4ever_vr

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/vr-am33v2-linuxboard/vr-prefirstrun-fido.sh -O /tmp/vr-prefirstrun.sh

sh /tmp/vr-prefirstrun.sh vr-am33v2-linuxboard 20160510 venture-image-gui vr

provisioning

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/vr-am33v2-linuxboard/vr-firstrun.sh -O /tmp/vr-firstrun.sh
sh /tmp/vr-firstrun.sh

//login username: root password: rfid4ever_vr

Extra Instructions (special use only)

old u-boot to new u-boot

bootp
tftp ${loadaddr} u-boot-vr-am33v2-linuxboard-20160510.bin
nand erase 0x000c0000 0x00100000
nand erase 0x00260000 0x00020000
nand write ${loadaddr} 0x000c0000 0x00100000

tftp ${loadaddr} MLO-vr-am33v2-linuxboard-20160510.bin
nand erase 0x00000000 0x00080000
nand write ${loadaddr} 0x00000000 0x00020000
nand write ${loadaddr} 0x00020000 0x00020000
nand write ${loadaddr} 0x00040000 0x00020000
nand write ${loadaddr} 0x00060000 0x00020000

reset