XerafyInternational

VR 8-Port Shelf

Customer Specific Configuration

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/vr-am33v2-linuxshelf/vr-8ant-secondrun.sh -O - | sh

After VR Hardware Manager test

• Reboot unit after Test

North American Units

echo "SET REGION NA" | nc localhost 2020 | grep "ACK"
echo "COMMIT" | nc localhost 2020 | grep "ACK"

• Wait 30sec before unplugging.

ETSI Units

echo "SET REGION EU3" | nc localhost 2020 | grep "ACK"
echo "COMMIT" | nc localhost 2020 | grep "ACK"

• Wait 30sec before unplugging.

---

VR 24-Port Shelf

Prepare before test

Run the second run script before VSWR test if a shelf board is already installed.

Region NA (Sampling frequency: 902 MHz, 928 MHz, 915 MHz):

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/xerafy/vr-xf-24port-secondrun-na.sh -O - | sh

Region EU (Sampling frequency: 865.7 MHz, 867.5 MHz, 866.3 MHz):

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/xerafy/vr-xf-24port-secondrun-eu.sh -O - | sh

Region BR (Sampling frequency: 902 MHz, 928 MHz, 915 MHz):

wget http://readonly:secret@svn.crm.ventureresearch.com/svn/linux/testing/xerafy/vr-xf-24port-secondrun-br.sh -O - | sh

Also set asyncofftime to be zero before VSWR test:

set asyncofftime 0

Manual Setup

Manual setup in case you may need:

Update M6e firmware

cd /tmp && curl http://readonly:secret@svn.ventureresearch.com/svn/linux/testing/thingmagic/m6e/update-m6e-reader-beta.sh | bash && rm /home/user/m6efirmware.sim

Enable 32 antennas

set antenna tmmux32